Finishing renovations in Sofia

FINISHING RENOVATIONS IN SOFIA BY TOSHEW STROY

WE WORK FOR YOU
15

WE WORK FOR YOU

Renovation of bathroom

Renovating a bathroom is one of the most demanding yet important steps in updating a home. It’s a space we use every single dayβ€”for fresh

Read more Β»

Finishing renovations in Sofia

Finishing renovations in Sofia, professional execution of the final construction and renovation works in apartments, houses, offices and commercial premises. Finishing works are the stage at which a construction project becomes a completed, functional space ready for use.

After the completion of the rough construction works comes the stage of the activities that determine the final appearance of the interior – leveling and preparation of walls, plastering, painting, construction of ceilings, preparation of floors, cladding, installation works and precise finishing of all details.

TOSHEV STROY performs finishing renovations in Sofia and the surrounding area, with the individual activities being carried out independently or as part of a complete renovation of a home or another type of property.

What are finishing renovations?

Finishing renovations include the construction activities that are carried out after the main installation and structural works and prepare the premises for furnishing and use.

This is one of the most important stages of the renovation. It is precisely then that the quality of the workmanship becomes visible – whether the walls are even, the joints are precise, the flooring is properly installed, the corners are well finished and the different materials transition smoothly into one another.

Even the highest-quality materials cannot compensate for inaccurate workmanship. Therefore, during finishing construction works, the correct sequence, preparation of the base and attention to detail are just as important as the choice of materials itself.

What finishing activities do we perform?

Depending on the condition of the property and the desired final result, the finishing renovation may include various activities:

  • preparation and leveling of walls and ceilings;
  • plastering and fine smoothing of surfaces;
  • sanding and preparation for painting;
  • priming and painting with latex paint;
  • construction of partition walls and wall linings made of plasterboard;
  • construction of suspended ceilings;
  • decorative structures and plasterboard niches by Knauf;
  • preparation and leveling of floors;
  • application of self-leveling screeds;
  • tile installation and finishing of claddings;
  • finishing of bathrooms and other wet rooms;
  • finishing of openings, edges, corners and decorative elements;
  • installation and finishing around electrical switches, sockets and lighting fixtures;
  • installation of sanitary equipment after completion of the main construction works;
  • final corrections and preparation of the premises for furnishing.

The exact scope of the work is determined according to the condition of the specific property and the project for its completion.

Finishing renovations of apartments

When renovating an apartment, the finishing works usually begin after the completion of demolition works, plumbing and electrical installations and the main construction changes.

This is the moment when the rooms gradually begin to acquire their final appearance.

The walls and ceilings are prepared, the necessary leveling and plastering are carried out, the floors are leveled, plasterboard structures are built and the final decorative coatings are applied.

When the different activities are carried out by one team, their sequence can be organized much more effectively. This avoids situations in which an already finished surface has to be demolished or repaired because of work that should have been carried out earlier.

Plastering and wall preparation

A good base is essential for a high-quality final result. Before painting, the walls must be strong, even and properly prepared. If necessary, old and unstable coatings are removed, defects are corrected and suitable plaster is applied.

Fine plastering and proper sanding make it possible to achieve a smooth surface on which the paint can be applied evenly.

Especially in modern interiors with large windows, side lighting or track lighting systems, irregularities on walls and ceilings are very easy to notice. This is precisely why preparation should not be underestimated.

Painting and final finishing

Painting is among the final stages of an interior renovation, but its quality directly depends on everything completed before it. A properly prepared base, suitable primer and high-quality application of latex paint make it possible to achieve an even and durable coating.

Color also plays a major role in the final result. Light shades can visually enlarge a room, while darker and contrasting colors allow the creation of accent areas and a different sense of space.

When carrying out a finishing renovation, the painting is planned so that already completed flooring, windows, doors and other elements are properly protected.

Finishing works with plasterboard

Plasterboard offers numerous possibilities for shaping and functionally transforming an interior. It can be used to straighten existing walls, build new partition structures, wall linings, niches, decorative elements and various types of suspended ceilings.

The structures also allow installations to be concealed and different lighting systems to be integrated. When properly installed, plasterboard provides an even and stable base for subsequent plastering and painting and offers great flexibility when creating modern interiors.

Suspended ceilings and modern lighting

A suspended ceiling can perform both a decorative and a practical function. In addition to shaping the interior, it allows electrical cables and other utilities to be concealed, irregularities in the existing ceiling to be corrected and various types of lighting to be integrated.

A particularly popular solution in contemporary homes is ceilings with built-in or magnetic track lighting. With these, the structure and the electrical installation must be planned in advance in order to achieve a clean and finished result without subsequent corrections.

Floor preparation and leveling

High-quality flooring begins with a properly prepared base.

If there are differences in level or other defects, preliminary floor leveling may be necessary. One option is the application of a self-leveling screed, which creates a suitable base for the subsequent installation of various floor coverings.

Before work begins, the condition of the existing base, the required thickness, the specifics of the room and the type of future floor covering are assessed. This is particularly important in renovations where different floor coverings are used in different rooms and the correct final levels must be achieved.

Tiles and finishing of wet rooms

Bathrooms, sanitary rooms and other areas with high humidity require special attention. In these areas, good appearance is only part of the task. The materials and individual layers must be suited to the moisture and the way the room will be used.

Tile installation must be carried out on a suitably prepared base, while paying attention to levels, the arrangement of joints, internal and external corners and transitions between the different surfaces. After the cladding has been completed, sanitary ware, faucets, lighting and the remaining finishing elements can be installed.

The correct sequence is part of a quality renovation

Finishing activities should not be regarded as separate and unrelated operations. Each of them depends on the previous one. For example, the walls must be prepared before painting, the floor base must be leveled before the final covering is installed, and the lighting positions must be specified before the ceilings are finally closed.

Good organization reduces the risk of repeated work, damage to already finished surfaces and unnecessary extension of the renovation period. Therefore, it is important to determine the sequence of the individual stages before work begins.

Finishing renovation of new construction

A new home does not always mean a move-in-ready home. Many apartments are handed over at a stage where the owners need to organize a complete range of finishing works before furnishing. Depending on how the property has been delivered, corrections to walls and floors, plastering, painting, ceiling construction, bathroom finishing and preparation of the rooms for furniture installation may be required.

At this stage, it is also appropriate to plan the future positions of lighting, furniture, televisions, kitchen equipment and the remaining interior elements. This allows the construction activities to be coordinated with the final layout before the rooms are completely finished.

Partial or complete finishing renovations

Not every property requires complete renovation. In some cases, the structural part and installations are in good condition and only the visible surfaces need to be renewed.

In such cases, only specific finishing activities can be carried out – for example, plastering and painting, a new suspended ceiling, floor leveling or replacement of the cladding. For larger projects, the finishing works can be included as the final stage of a complete interior renovation.

Finishing renovations for houses, offices and commercial properties

Finishing construction works are not limited to apartments. They are also a necessary stage when renovating houses, offices, shops and other commercial or administrative premises.

The requirements are different for each type of property. In a home, comfort and appearance are usually the main priorities, while in office and commercial spaces, the durability of the materials, functionality and the ability of the premises to be used daily under heavier loads are particularly important.

Therefore, the technology and materials must be selected not only according to the design but also according to the purpose of the specific space.

Finishing renovations in Sofia by TOSHEV STROY

A quality finishing renovation is a combination of good preparation, proper technology and attention to detail.

TOSHEV STROY performs construction and finishing renovations of residential and non-residential properties in Sofia and the surrounding area. Before work begins, the condition of the property, the required activities and the sequence of execution are specified.

The goal is for the client to receive a completed space in which the individual stages of the renovation have been carried out in the correct sequence and all details have been coordinated with the final result.

If you are planning a finishing renovation of an apartment, house, office or another property in Sofia, contact TOSHEV STROY for an inspection and clarification of the necessary construction and renovation activities.

Toshev Stroy on FB

F.A.Q - FINISHING RENOVATIONS SOFIA

What does a finishing renovation include?

The scope depends on the condition of the property. It usually includes preparation of walls and ceilings, plastering, painting, plasterboard structures, suspended ceilings, floor preparation, cladding and various final installation works.

Can only part of the finishing works be carried out?

Yes. If necessary, only specific renovation works can be carried out, such as plastering, painting, installation of a suspended ceiling, self-leveling screed or tile installation.

Do you carry out finishing renovations in new construction?

Yes. In new properties, the necessary works can be carried out to bring the premises to a condition suitable for furnishing and use.

What determines the price of a finishing renovation?

The price depends on the area, the condition of the substrates, the type and quantity of the required works, the selected materials and the complexity of the execution. The most accurate estimate can be made after an inspection of the specific property.

Do you work outside Sofia?

The possibility of carrying out projects in the surrounding area is determined according to the location, scope and nature of the renovation.

REQUEST FOR INSPECTION